 Aluminum Chart
Compositions of Common Aluminum Grades
Maximum weight % unless a range or minimum is shown
 |
Al |
Si |
Fe |
Cu |
Mn |
| 1100 |
99.00
min |
0.95
(Si + Fe) |
- |
0.05-0.20 |
0.05 |
| 2014 |
rem
(1) |
0.50-1.2 |
0.7 |
3.9-5.0 |
0.40-1.2 |
| 2024 |
rem
(1) |
0.50 |
0.50 |
3.8-4.9 |
0.30-0.9 |
| 2219 |
rem
(1) |
0.20 |
0.30 |
5.8-6.8 |
0.20-0.40 |
| 5083 |
rem
(1) |
0.40 |
0.40 |
0.10 |
0.40-1.0 |
| 6061 |
rem
(1) |
0.40-0.8 |
0.7 |
0.15-0.40 |
0.15 |
| 7050 |
rem
(1) |
0.12 |
0.15 |
2.0-2.6 |
0.10 |
| 7075 |
rem
(1) |
0.40 |
0.50 |
1.2-2.0 |
0.30 |
| 7175 |
rem
(1) |
0.15 |
0.20 |
1.2-2.0 |
0.10 |
|
Mg |
Cr |
Ni |
Zn |
Zr |
| 1100 |
- |
- |
- |
0.10 |
- |
| 2014 |
0.20-0.8 |
0.10 |
- |
0.25 |
- |
| 2024 |
1.2-1.8 |
0.10 |
- |
0.25 |
- |
| 2219 |
0.02 |
- |
- |
0.10 |
0.10-0.25 |
| 5083 |
4.0-4.9 |
0.05-0.25 |
- |
0.25 |
- |
| 6061 |
0.8-1.2 |
0.04-0.35 |
- |
0.25 |
- |
| 7050 |
1.9-2.6 |
0.04 |
- |
5.7-6.7 |
0.08-0.15 |
| 7075 |
2.1-2.9 |
0.18-0.28 |
- |
5.1-6.1 |
- |
| 7175 |
2.1-2.9 |
0.18-0.28 |
- |
5.1-6.1 |
- |
|
Ti |
Other
Elements |
Source |
| Each |
Total |
| 1100 |
- |
0.05 |
0.15 |
ASTM
B247-02a |
| 2014 |
0.15 |
0.05 |
0.15 |
ASTM
B247-02a |
| 2024 |
0.15 |
0.05 |
0.15 |
AMS
4120R |
| 2219 |
0.02-0.10 |
0.05
(2) |
0.15
(2) |
ASTM
B247-02a |
| 5083 |
0.15 |
0.05 |
0.15 |
ASTM
B247-02a |
| 6061 |
0.15 |
0.05 |
0.15 |
ASTM
B247-02a |
| 7050 |
0.06 |
0.05 |
0.15 |
ASTM
B247-02a |
| 7075 |
0.20 |
0.05 |
0.15 |
ASTM
B247-02a |
| 7175 |
0.10 |
0.05 |
0.15 |
ASTM
B247-02a |
(1) remainder
(2) Vanadium, 0.05 - 0.15
| Disclaimer: Although the
information set forth herein is believed to be correct,
Scot Forge makes no recommendation, or offers no warranty
of any kind with respect to the subject matter or
its accuracy. Scot Forge specifically disclaims all
warranties, expressed, implied, or otherwise, including
without limitation, all warranties of merchantability,
fitness, or suitability for a particular purpose or
application. |
|
